My House Pipes Burst – Here’s What You Need To Do

You are one of the fortunate ones who has never had a pipe burst. It’s possible for pipes to burst, which can cause significant water damage. These are some ways to handle a burst pipe.

Steps To Take After A Water Pipe Bursts

Burst pipes are a common problem. Every year, approximately fifty million homeowners suffer from them. A 1/8 inch crack in a pipe can lead to 250 gallons of water per day flooding your home if it is not treated. Each flood situation is unique, so each one requires a different solution.

It is crucial that you act immediately if a piping issue occurs due to the potential for water damage. This is a step-by-step guide to stopping damage caused by a burst pipe.

You Must Turn Off Your Main Water Supply

This is the most important step to prevent further water damage to your house. This will stop all water from entering your home, and make it easier to fix the burst pipe. If the leak is near an electric source, you might need to shut off your main power supply.

Signs That You May Be At Risk Of A Pipe Bursting

Although there are many causes for pipes burst, there are some common issues that can lead to this type of emergency. Most cases of pipes burst do not happen suddenly. You should monitor the plumbing lines in your home throughout the year and be alert for potential danger signs. Why do pipes burst?

Pipes Can Burst If They Freeze In Water

Water freezes at 32 degrees Fahrenheit. Frozen water can cause a pipe to shrink and burst due to the pressure buildup. This can happen to indoor plumbing lines as well. There is a risk of unburied outdoor pipes freezing in temperatures below zero without heat tape If indoor pipes are connected to a poorly insulated exterior wall they can freeze and burst. However, if the pipes’ exterior sections are wrapped and there internal lengths are run through a warm basement or wall with good insulation, they won’t be at risk.

If Your Pipe Is Already Frozen, You Need To Act Quickly

Turn on the faucet to check if water is flowing. First, check for other faucets if no water is coming out of the faucet. Next, check for leaks or burst pipes along the water lines connecting the faucets to your main water pipe.

Pipes That Are Exposed To Extreme Heat May Burst

Weak pipes can burst when exposed to extreme summer temperatures or high heat utility areas that have heavy water use. Regularly inspect, maintain and strengthen water lines.

Plumbing Lines Can Burst If They Are Clogged

A clog can block the flow of water as well as its release from the pipe. This can quickly cause excessive pressure to build up. The pipe may burst if the pressure is too high.

Pipes Can Burst If They Are Damaged By Corrosion

Pipes can become corrosion due to excessive calcium in the water or oxidation. Corrosion can lead to pipe bursts and weakening of the pipe walls over time.

A Pipe Can Burst If It Is Moved

The contracting and thawing of pipes can change as temperatures change from cold to warm. A pipe might also shift slightly from being bumped or shaken by high water pressure. A breach may occur if the pressure is increased or the fittings are jarred loose.

How To Avoid Burst Pipes At Your Home

A burst pipe can result in property damage and contamination of wastewater, as well as a shock water bill. It is important to monitor your plumbing system all year. You can still prevent your pipes from freezing or bursting even in the midst of winter’s harshest temperatures. These are some simple steps to prevent pipes bursting:

• Repair air leaks that allow cold water to enter your home, where there are plumbing lines.
• You can keep interior pipes warm by controlling air temperature.
• To allow warm air to flow to the pipes, leave cabinet doors open beneath exterior sinks.
• To prevent pipes freezing in low temperatures, keep faucets on a little.
• Wrap exterior plumbing lines with heat tape in winter to keep them warm
• To drain the water from your garden hose bib, disconnect it from the outside faucet. This will prevent it freezing and breaking.
• Get a water damage restoration specialist or another licensed plumber to inspect your water pipes.

911 Restoration of Mesa is the best choice to handle water damage from a bursted pipe in your home. A burst pipe can cause serious damage to a household, as you can see from the information. 911 Restoration of Mesa can help you with any flood, fire, smoke or water situation that might have reached your home. These services 911 Restoration of Mesa provides are:

• Inspection and Water Damage Assessment – Assessing water damage caused by burst pipes, inspecting them,
• Water Removal and Extraction – Removing excess water from a burst pipe.
• Drying and Dehumidification– Drying the area affected by the burst pipes.
• Cleaning and Sanitizing: Cleaning up the damages and sanitizing any areas left by the burst pipe.
• Restoration Restoring water damaged property.

911 Restoration of Mesa Can Help If A Pipe Bursts In Your Home

We are your water damage and restoration experts. We can quickly restore your home to the condition it was before flooding. We offer the most efficient restoration and damage repair services, so that you can enjoy your home again. Expert mold removal is often required after flooding.